Under $40 TV Wall Mount Kits That Hide Every Cord

There's nothing that makes a living room look more finished than a TV mounted on the wall with zero visible cords. It's one of those upgrades that seems like it should cost a lot, but honestly, the hardware to do it well is shockingly affordable. The hard part is knowing which pieces you actually need — and which ones are overpriced for no reason.

Here's the thing: a wall mount itself is only part of the equation. The real magic happens when you pair it with a cord management raceway that runs along the baseboard or up the wall. Together, these two things transform a tangle of cables into a completely clean installation. And you can pull it off for well under $80 total — often closer to $40-50 if you're strategic.

What Full Motion TV Mount Actually Lets You Do

A full-motion (also called articulating) TV mount is worth every penny over a flat mount because it lets you tilt, swivel, and pull the screen away from the wall to reach cables or adjust the angle from different seats.

For most living rooms, a good full-motion mount in the $25-35 range handles TVs from 26 in. up to 60 in. and holds anywhere from 60 to 100 lbs. Always check the VESA pattern on the back of your TV before ordering — it's the screw hole spacing — but most mounts accommodate multiple VESA sizes.

The Cord Cover That Makes Your Mount Look Professional

A white paintable cord raceway is the single most impactful finishing touch for a wall-mounted TV — without it, even the cleanest mount looks unfinished.

Legrand's Wiremold cord concealer is one of the most-recommended products in this space. It adheres to the wall with included adhesive strips (no drilling required), and the channel is wide enough to hide multiple HDMI, power, and streaming device cables at once. It comes in white and can be painted to match your wall color.

Best Flat Cord Hider for Running Cables Down the Wall

For a truly seamless look, a flat wall-mounted cord hider that runs vertically down the wall behind the TV is cleaner than any raceway along the baseboard.

This style of cord cover is self-adhesive and low-profile — it essentially disappears against the wall, especially once painted. The D-Line version is consistently well-reviewed for its ability to stay adhered over time without peeling, which is the main failure mode on cheap versions.

White Cable Raceway for Baseboards

Running cords along the baseboard rather than down the wall gives a cleaner look in rooms with crown molding or textured walls that make vertical runs difficult.

A white cable raceway channel along the baseboard is particularly useful when your TV outlet and the TV mount are on different walls. This one comes in 6-foot segments that can be cut to length, and the white color blends with most baseboards without painting.

The Perlegear Mount for Larger TVs

If your TV is 55 in. or larger, the Perlegear Full Motion mount is worth the slightly higher price point — it's rated for heavier TVs and has better cable management built into the arm.

Perlegear is a brand that consistently appears in best-of lists for TV mounts because their quality control is noticeably better than generic options. The integrated cable management channels in the arm keep the cords from dangling when you swing the TV out. It works with TVs from 26 to 60 in. and includes in-wall power outlet options for truly cord-free installs.

The In-Wall Cable Kit (If You Can Use It)

If you're mounting above a fireplace or in a spot where running a raceway down the wall would be visible, an in-wall cable concealment kit is the most finished-looking option — and it's cheaper than you'd think.

These kits let you run cables inside the wall between two outlet-style plates — one near the TV, one near the floor. It requires a bit more effort than an adhesive raceway, but the result looks completely professional, like a custom installation. Most kits include everything you need including the UL-listed power extender for the TV's power cord.

Quick Tips for a Clean TV Wall Mount Install

• Stud-find first: Always mount your TV bracket into wall studs, not just drywall anchors — a 55 in. TV is too heavy to risk it.
• Buy extra cord cover: Cord raceways are cheap, so buy more than you think you need. It's better to have extra than to run short 3 feet from the outlet.
• Paint the raceway before installing: If you're painting the cord cover to match your wall, it's much easier to paint it flat on a table than after it's adhered to the wall.
• Plan the cable route before drilling: Trace the path from the TV to the outlet and measure twice before you commit to mounting holes.
• Use a magnetic stud finder: Spring-loaded stud finders are notoriously unreliable — a magnetic one (under $10) is far more accurate.

The combination of a full-motion mount and a good cord management system turns a basic TV setup into something that looks genuinely custom — and you can do it for well under $100. Found something you love? Pin this for later so you don't lose it!